Additional Details
New Landing Pad design to fit the tracks or inner wall mounting points of roof rails on vehicles from Cadillac, GMC, and Hyundai.Combine with SkyLine towers and any Yakima crossbars to create a base rack system ready to attach a wide selection of gear mounts for the journey ahead.
Landing Pad #20
Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
Complete set of 4 Landing Pads with no additional tools required
28-38” crossbar spread (depending on vehicle) works well with Yakima gear mounts
Includes tamper-proof security screws
Snap-on covers keep out the elements
Fits Vehicles: 2007-12 Hyundai Santa Fe, 2007-14 GMC Yukon Denali, 2007-14 GMC Yukon XL Denali, 1999-2014 Cadillac Escalade, 2007-13 Cadillac Escalade EXT
Weight: 1.90 lbs.
Additional Details
This low-profile custom-install solution delivers up to a 220-lb. load capacity. It’s a great choice for most any naked roof vehicle with a roof ditch. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts, including a roof top tent.
Landing Pad #21
Permanent installation into the roof ditch for up to a 220-lb. load rating.
Designed for use with our SkyLine™ towers paired with any Yakima crossbar.
Yakima’s patented Landing Pad design for quick and easy tower installation and removal.
Includes snap-on covers for when the rack is removed.
Choice of two pad shapes lets you create the perfect fit.
Stainless steel rivets for superior strength.
Includes four Landing Pads and necessary hardware. (See instructions for required list of tools)
Vehicle must have compatible roof ditch for proper instillation. (see instructions for fit parameters)
Weight: 2.57 lbs.
Additional Details
New Landing Pad design to fit a variety of vehicles from Acura, Ford, Honda, and Jeep with non-structural flush roof rails.Combine with SkyLine towers and any Yakima crossbars to create a base rack system ready to attach a wide selection of gear mounts for the journey ahead.
Landing Pad #19
Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
Complete set of 4 Landing Pad hardware with no additional tools required
28-38” crossbar spread (depending on vehicle) works well with Yakima gear mounts
Includes tamper-proof security screws
Snap-on covers keep out the elements
Weight: 2.25 lbs.
Additional Details
Streamlined and secure, this is our new, low-profile Landing Pad for fixed-point roofs. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts to customize your adventure-mobile.
Landing Pad #22
Fit more than 80 vehicles with a single SKU!
Improved vehicle interface while maintaining the same vehicle fits as Landing Pad 11
Works with SkyLine towers and any Yakima crossbars
Designed to deliver the quickest and easiest tower installation and removal
Easily locks to your vehicle with our SKS system (sold separately)
Includes a complete set of four Landing Pads and all necessary hardware - no additional tools required
Snap-on covers keep out the elements
Choice of two pad shapes lets you create the perfect fit
Low profile & easy to use Landing Pad for fixed-point roofs
Works with SkyLine towers or Control Towers and Yakima crossbars to create the perfect system
Super simple – quick and easy installation and removal
Includes all you need – four Landing Pads and necessary hardware
Snap-on covers keep out the elements when the rack is removed
Choose from two pad shapes to create the perfect fit
Weight: 2.10 lbs.
Additional Details
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2011+ Grand Cherokee.Combine with SkyLine Towers and StreamLine crossbars for a full featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars.
Landing Pad #18
Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
Complete set of 4 Landing Pads with no additional tools required
32” crossbar spread allows most Yakima gear mounts
Snap on covers to keep the elements out while the rack is removed
Weight: 1.25 lbs.
Additional Details
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2019+ Toyota Rav4. Combine with SkyLine Towers and StreamLine crossbars for a full featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars.
Landing Pad #23
Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
Complete set of 4 Landing Pads with no additional tools required
33” crossbar spread allows most Yakima gear mounts
Snap on covers to keep the elements out while the rack is removed
Weight: 1.35 lbs.
Additional Details
Custom Landing Pads to install directly to crossbar mounting points on the flush rails of 2015+ Chevrolet Tahoe and Suburban, GMC Yukon, and Cadillac Escalade models.Combine with SkyLine Towers and StreamLine crossbars for a full featured Yakima base rack with increased cargo capacity beyond the factory crossbars.
Landing Pad #17
Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
Complete set of 4 Landing Pads with no additional tools required
28" crossbar spread allows most Yakima gear mounts. Additional 52" spread on longer models.
Includes tamper-proof security screws
Snap on covers to keep the elements out while the rack is removed
Weight: 2.00 lbs.
Additional Details
Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars.
Landing Pad #24
Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
Complete set of 4 Landing Pads with no additional tools required
40" crossbar spread works well with long loads and LockNLoad platforms
Snap on covers to keep the elements out while the rack is removed
Weight: 2.22 lbs.
Additional Details
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2014 - 2019 Highlander.Combine with SkyLine Towers and StreamLine crossbars for a full featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars.
Landing Pad #16
Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
Complete set of 4 Landing Pads with no additional tools required
27 1/2” crossbar spread allows most Yakima gear mounts
Snap on covers to keep the elements out while the rack is removed
PRODUCT SPECS
Weight: 1.36 lbs.
Additional Details
Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars.
Landing Pad #25
Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
Complete set of 4 Landing Pads with no additional tools required
27"-32" crossbar spread (depending on vehicle) works well with most Yakima gear mounts
Snap on covers to keep the elements out while the rack is removed
Weight: 1.63 lbs.
Additional Details
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars.
Landing Pad #15
Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
Includes a complete set of 4 Landing Pads, no additional tools required
Crossbar spread allows most Yakima gear mounts
Snap on covers to keep the elements out while the rack is removed
Weight: 1.60 lbs.
Additional Details
Increase total crossbar capacity for your Subaru Outback.
Additional Details
Increase total crossbar capacity for your Subaru Outback.
Landing Pad #13
Landing Pad for 2013-2014 Subaru Outback
Also compatible with 2010-2012 Subaru Outback models
Offers boat-and-cargo box friendlier 30” crossbar spread
Includes a snap-on cover when not in use
Increase total crossbar capacity
Highest available weight rating (165 lbs.)
Includes four custom Landing Pads
Patent pending
Weight: 2.20 lbs.
Additional Details
Landing Pad solution for vehicles with factory mounting points. Comes with stainless M6 and M8 hardware in two lengths to accommodate various fits.
Additional Details
Landing Pad solution for vehicles with factory mounting points. Comes with stainless M6 and M8 hardware in two lengths to accommodate various fits.
Landing Pad #11
Includes a snap-on cover when not in use
Each pad sold in a set of two
Patent pending
Weight: 1.40 lbs.
Additional Details
Attaches Control Towers to factory rack mountingpoints on Honda CRV 2007-11.
Landing Pad #10
Includes a snap-on cover when not in use
Each pad sold in a set of two
Patent pending
Weight: 1.10 lbs.
Additional Details
These are the most versatile way to attach your rack wherever you want. (Within reason, anyway. please obey local ordinances.
Landing Pad #9
Includes a snap-on cover when not in use
Each pad sold in a set of two
Patent pending
Weight: 1.00 lbs.
Additional Details
Attaches Control Towers to many popular factory luggage rack tracks.
Landing Pad #8
Includes a snap-on cover when not in use
Each pad sold in a set of two
Patent pending
Weight: 0.80 lbs.
Additional Details
Permanently mounts directly to your vehicle roof and accepts SkyLine Towers or Control Towers.Uses "blind" fasteners for easy installationwhen the underside of the roof is not accessible.
Landing Pad #7
Includes a snap-on cover when not in use
Each pad sold in a set of two
Weight: 0.78 lbs.
Additional Details
Permanently attached bases provide a mounting point for SkyLine Towers or Control Towers. Bolts onto truck caps, tent trailers, RV’s, or boats.
Landing Pad #6
Includes a snap-on cover when not in use
Each pad sold in a set of two
Weight: 0.84 lbs.
Additional Details
Attaches SkyLine Towers or Control Towers to many popular factory luggage rack tracks.
Landing Pad #5
Includes a snap-on cover when not in use
Each pad sold in a set of two
Includes 4 metal “C” anchor plates 1-3/16” x 13/16” and 4 metal “D” anchor plates 1-1/2” x 13/16” (Contact Yakima Customer Service for additional size anchor plates)
Weight: 0.86 lbs.
Additional Details
Attaches SkyLine Towers or Control Towers to many popular factory luggage rack tracks.
Landing Pad #4
Includes a snap-on cover when not in use
Each pad sold in a set of two
Includes 4 metal “C” anchor plates 1-3/16” x 13/16” (Contact Yakima Customer Service for additional size anchor plates)
Weight: 0.60 lbs.
Additional Details
These are the most versatile way to attach your rack wherever you want. (Within reason, anyway. please obey local ordinances.
Custom Landing Pads work with Control Towers to fit a broad range of factory tracks and other applications.
Additional Details
If you have a vehicle with factory racks or rails, the Landing Pads are the foundation to start with. Pair with versatile SkyLIne Towers or Control Towers to make an easy and secure tower system. Each Landing Pad is custom made to fit the exact make and model of your car.
Landing Pad #1
Designed to fit with SkyLine and Control Tower system for the easiest on/off roof rack in the industry
Each pad sold in a set of 2
Configure your vehicle and find out which Landing Pads fit your car
Includes a snap-on cover when not in use
Includes 4 metal “A” anchor plates 7/8” x 11/16” (Contact Yakima Customer Service for additional size anchor plates)
Weight: 0.25 lbs.
Return Policy
30-day return policy, as long as the product is not completely used. 30-day return policy without wear and tear & with original receipt. If credit or debit cards were used, refunds will be returned to original card. If cash was used, refunds will be paid by check. If the item has noticeable wear-and-tear, a case-by-case basis will be applied for a reduced refund or trade-in value.
Installation
If you need assistance with product installation, please schedule an appointment. Customers do not have to go into the store to make an appointment, as they can be made over the phone at 800-722-5872.
During peak seasons, deposits are required to hold an appointment. Rack N Road will call the day before to confirm the appointment time. We usually recommend a week in advance to schedule appointments, but certain seasons are busier than others and timing varies across all locations.
